Types Of Woodworking Tools

Ready to jump into woodworking and carry out some more challenging projects? You might want to level up your tool game, too. But there are 100’s of equipment possibilities.

Some Basic Woodworking Tools

Below is a quick rundown of the 10 best tools for your woodworking endeavors:

The Claw Hammer

Starting with possibly the most essential tool in every home – the claw hammer. The “claw” on the back of the hammer should be best equalized by the finished head, in which should be slightly rounded.

The Tape Measure

The next significant hand tool for the woodworker is a tape measure that is retractable and accurate. Purchase one that is at a minimum of twenty-five feet long. Any longer, you are going to start having issues getting it to roll back up.

The Utility Knife

An excellent utility knife is another tool for the woodworker. There are a lot of different types, but the type that utilizes disposable blades is the most common. The blade goes back into the grip, via slider for safety reasons. The woodworker is going to use the utility knife when scribing wood or cleaning out mortise joints, in addition to a lot of other uses.

The Moisture Meter

A high-quality wood moisture meter is crucial to any woodworking project you piece together. Lumber yards try to dry their stocks of lumber in accordance with the intended end destination. Therefore, if the wood is harvested in the moisture prone Northeast but shipped to the desert-like Southwest, it is going to be dried more than wood stored in the Northeast used by woodworkers.

The Chisel

A variety of chisels is a must for every woodworker’s workbench. Chisels are not just for those that carve wood. Any woodworker is going to need chisels for cleaning out joints and their saw cuts. Try and find chisels made of high-alloyed carbon.

The Level

Every woodworker is going to need at least a couple of levels. You most likely won’t need one of the six-foot levels used for construction, but around 48 inches is plenty of length for many of the woodworking projects you will most likely do.

The Screwdriver

Screwdrivers are another essential tool in the woodworker’s tool belt. Quality construction is crucial to any good set of screwdrivers. However, a lot of them are made out of soft metal, and the first time you put any pressure on them, they could strip out, becoming ineffective.

The Nail Set

Another hand tool every woodworker needs to have is a set of nails. Actually, you should have a multitude of sizes. They have a similar appearance like awls, and they are used to forcing nail heads into wood, so they get flush or just below the surface. This enables you to fill the holes and prep for painting or staining.

The Sliding Bevel

When you are going to be measuring a lot of angles, a T-Bevel, or sliding bevel, is going to be a handy tool. This can be adjusted, and it can be locked at the angle you wish to mark, making it a lot easier to mark several angles.

The Layout Square

A “combination square”, layout square, or comes in six- and twelve-inch sizes. A lot of woodworkers use the six-inch model merely because it’s easiest to utilize. Additionally, most of the wood you are going to use will be no bigger than six-inches wide, so twelve-inches is a bit much.

Hardwoods Mesa by Timber Woodworking

Timber Wood Working offers hardwoods in Mesa, Arizona. We specialize in woodworking tools, equipment, and supplies for commercial woodworking cabinet shops or furniture manufacturers as well as the home shop hobbyist. Contact us today, or call if you should have any questions.